SY002 Sound Card Firmware Upgrade Instructions
SY002 sound card firmware upgrade steps are as follows: Connect the SY001 sound card to the computer through a USB cable. Open File【MV_BP10xx_PC_Tools_V2.2.11_20210518】, double-clicking to execute the upgrade software (MV_AP82xx_BP10xx_PC_Tools_V2.2.11) in this file. 3.The penal is as follows, the lower left corner will show that the USB is connected（USB 已连接）, if it does not show …
Quick Start Guide to Synido LiveMix Duet Kit
Connect the phone and audio interface via OTG cable 1. OTG cable connects to the audio interface USB-C port and phone USB port 2. OTG cable with audio interface icon is connected to audio interface USB-C jack OTG cable with the phone icon connects to the phone USB jack OTG cable USB-A connector connects to …
Quick Start Guide to Synido LiveMix Solo Kit
Connect the phone and audio interface via the OTG cable 1. OTG cable connects to audio interface USB-C port and phone USB port 2. OTG cable with audio interface icon is connected to audio interface USB-C jack OTG cable with the phone icon connects to the phone USB jack OTG cable USB-A connector connects to …
Quick Start Guide to Synido LiveMix Solo Kit Read More »
Synido Voice 100 Firmware Upgrade Instructions
Synido Voice 100 firmware upgrade steps are as follows: 1.Connect the SY001 sound card to the computer through a USB cable. 2.Open File【MV_BP10xx_PC_Tools_V2.2.11_20210518】, double clicking to execute the upgrade software (MV_AP82xx_BP10xx_PC_Tools_V2.2.11) in this file. 3.The penal is as follows, the lower left corner will show that the USB is connected（USB 已连接）, if it does not …
When installing the Mac driver, it prompts This software needs to be updated. Contact the developer for more information.How to solve it?
The first way: enable “Anywhere” ①Type in the terminal: sudo spctl –master-disable, and then press “Enter”. If your computer has a password set, you will be prompted to enter the password. You will not see the password display during the entire process of entering the password. Continue to enter the complete password and press “Enter” …
How to use Voice 100 with computer, cell phone 3.5mm synchronization for live streaming?
1.USB interface to connect to the computer 2. Set the computer default audio input and output to SYNIDO VIOCE 100 3.Mobile phone 3.5mm headset interface connected to LIVE live interface, the phone screen headset icon appears to indicate successful connection 4. Connect the corresponding microphone and headphones 5. Parameter Setting ①MIC VOL adjustment to 12 …
How to use Live 100 with computer, cell phone 3.5mm synchronization for live streaming?
1. live 100 PC interface connect to the computer 2. Computer set the default audio device to be synido live 100 3. Mobile phone 3.5mm connection interface LIVE1/2/3, Android phone screen headset icon appears to indicate successful connection 4. Connect the corresponding microphone and headphones Button Settings ①Mic vol 2 o’clock ②TREBLE 12 o’clock ③BASS …
Synido Live 100 FAQ
1. About the 4 microphone jacks on the audio interface There are 4 mic jacks in the audio interface, can I use 4 mics all at the same time? Is there a way that there can be a separate volume control for each mic? There is only one mic volume knob. Is this the only volume control …
What should I do if it prompts “Synido voice 100 cannot be opened because Apple cannot check it for malicious software” when installing the Mac driver?
If you receive the above prompt when installing the Mac driver, please follow the steps below: 1. Click the apple icon in the upper left corner and open “System Preferences” in the drop-down list. 2. Click “Security and Privacy”. 3. In the “General” interface, select “Open anyway”, and then follow the prompts. 4. After the …